Victory Molds realizes that when it comes to bullet molds, there are many quality products on the market today.  Please do not take our word for it when we say we have the best service, performance and convenience available in the bullet mold industry.

Feel free to read our customers' comments, browse through our picture gallery and take time to form your own opinion of what we can offer you in superb craftsmanship.

                                         Steve. . .striking a pose!

Gaylord Smith ~ Salt Lake City, Utah

Victory Molds -- Thanks again!  I shot the best bench-scope score in my class and third overall at the ISSA match in Raton, New Mexico this year.  Bullets from your five-cavity mold proved to be the best ever.  At least now I know when a shot falls out of the 25 ring, the bullet wasn't at fault!  I'll always have the advantage if I am the only one at a match shooting bullets cast from Victory Molds.  Now Steve, let's start talking about a mold for my 40-50 Sharps! You've spoiled me with the multi-cavity mold, and with your special ladle I can cast better quality bullets five times faster, leaving more time to get myself organized, The only down side is I can't bring myself to cast with single cavity molds anymore without wishing they were all like that five cavity. 

   Gaylord's actual 2003 International Schuetzenfest targets shot with bullets cast
   from a five-cavity Victory Mold.  Targets were shot at 200 yards/scope bench.
   Click on each thumbnail for a larger picture.

Bill Dezell ~ Salt Lake City, Utah

Mr. Fotou, your .322-205 spitzer is just what my Highwall was needing. WOW!  Who would have thought a cast bullet could shoot like that?  On calm days I can torture the numbers in the twenty-five ring. Truly a fine mould sir.

Jamie Olnie ~ Grantsville, Utah     

Steve, just wanted to say thanks for the .32 cal. 235 grain mold you made for my Russ Weber Winchester High Wall.  As you know, I was having the devil of a time trying to get that rifle to shoot. But now I will have to find some other excuse because that bullet muld solved most all my problems and puts them all right there as long as I do my part.

Joseph Weist ~

Mr. Fotou, just thought I would write to tell you I received the 358 mould you bored for me.  I cast some up and went out to the range to give them a try and scared myself.  I shot several groups that were just a small hole at 100 yards bench. The double-spouted ladle works great and really is a help.  I was doubtful at first but now I'm sold, a good Idea, the only way to cast with a double cavity mould.

Ed Owens ~ Delta Utah

Damn nice mould Steve.  It's exactly what I was looking for. Now I am going to have you build a 40 with a Snover nose.  I'll talk to you about it later.

Jeff  Robare ~ West Valley City, Utah

Hey Fotou, the new mould you cranked out for my volunteer rifle is a tack driver. With the Badger barrel you put on it I have a real honest shooter. Its just fun when everything works the way it is supposed to. Thanks.

Donald Klinko ~ Kansas City, Oklahoma

Steve thanks for the double cut off nose pour .458 520 grain mould. It casts great! The bullets are very consistent and shoot better than I can hold the rifles I am shooting them in.